Table of Contents
Advertisement
Volume Control
The volume control in your ReSound Pulse instrument is
fully automatic, so there is no need to bother with adjust-
ments. Your instrument has been programmed to vary its
amplifi cation according to your needs.
On/Off Function
Your ReSound Pulse is equipped with an on/off switch
integrated into the battery compartment. When the battery
compartment is fully closed, the instrument is turned on.
To turn the instrument off, grasp the battery compart-
ment door with your fi ngernail and gently pull. The
power will switch off at the point where you can feel a
small click. Whenever you are not wearing the instrument,
remember to turn it off to reduce battery consumption.
06
SmartStart™
Your hearing healthcare professional may have activated
the SmartStart function in your hearing instrument. The
SmartStart delays the switch-on time 10 seconds after
closing the battery compartment. This is indicated by beeps
at one second intervals after closing the battery compart-
ment. It allows you to place the instrument behind the ear
and insert the Thin Tube with xReceiver in the ear without
annoying sounds like squealing.
Putting ReSound Pulse on the Ear
1. Hang the instrument over
the top of the ear.
2. Grasp the Thin Tube
where it bends and push
the receiver with dome
into your ear canal. The
dome should be placed
far enough into the ear that
the Thin Tube lies fl ush with
your head. When the dome
is placed appropriately,
you should not see the
Thin Tube sticking
out when you look
directly into a mirror.
07
Advertisement
Table of Contents
