Volume Control; Program Selector - ReSound BTE User Manual

VOLUME CONTROL ("V" MODELS ONLY)
Some ReSound BTE hearing instruments offer a
volume control. Please refer to the diagram of your
hearing instrument in the accompanying insert for
the location of your volume control. When wearing
an instrument with a volume control you can increase
the volume by pushing the volume control toggle or
wheel up, and reduce volume by pushing or turning
it down.
For some models, you will hear a
beep with each change in volume.
The loudness of the beep will
increase as you turn the volume up
and decrease as you turn the vol-
ume down. If you reach the upper
or lower limit of the volume range, you will hear a
beep that is lower in pitch. For these models, the vol-
ume control will continue to move even after you hear
the lower pitched beep, but no additional changes in
volume will be heard.
For other models, the volume
control wheel is numbered
from "1" (lowest volume
setting) to "4" (maximum
volume setting). As you turn
the wheel up or down, the volume will increase or
decrease but no beeps will be heard. When the wheel
no longer moves in one direction or the other, you
have reached the upper or lower limit of the volume
range. Your hearing healthcare professional will help
you to identify your optimal volume setting.
10
ReSound BTEs
Learning volume control (select models)
On select models, your hearing healthcare profes-
sional may activate a learning volume control. This
feature enables your hearing instrument to learn how
you adjust the volume control in different listening
environments. As it learns your volume preferences,
the instrument eventually changes the volume for you
automatically. This feature can be turned off or reset
by your hearing healthcare professional.

PROGRAM SELECTOR

(SELECT MODELS)
Your ReSound BTE hearing instrument may feature
multiple programs. The selection of programs can be
changed by your hearing healthcare professional.
Please refer to the diagram of your hearing instrument
on the accompanying insert for the location of the
program selector.
1. You can switch between programs by pushing
the program selector once.
2. You will hear one or more beeps. The number
of beeps indicates which program you have
selected.
3. You can always return to Program 1 by turning
your instrument off and then on again, or by
placing it in stand-by mode (as described in the
following section) and then returning to its stan-
dard mode.
Note: You and your hearing healthcare professional
may wish to record the various listening programs
that have been programmed into your hearing instru-
ment on the accompanying insert.
11