Step 5 Positioning, Leveling, And Securing The Fireplace; Step 6 The Gas Control Systems - Heat & Glo PIER-TVFL-IPI Owner's Manual

Step 5
Positioning,
Leveling, and
Securing the
Fireplace
1. Place the fireplace
into position.
2. Level the fireplace
from side to side and
from front to back.
3. Shim the fireplace
with non-combustible
material, such as
sheet metal, as
necessary.
4. Secure the fireplace to
the framing by nailing
or screwing.
Step 6
The Gas Control
System
18
Heat & Glo • PIER-TVFL, ST-42TVFL-IPI • 455-901 Rev. F • 8/05
The diagram below shows how to properly position,
level, and secure the fireplace.
Figure 8. Proper Positioning, Leveling, and
Securing of a Fireplace
WARNING: THIS UNIT IS NOT FOR USE
!
WITH SOLID FUEL.
Intermittent Pilot Ignition (IPI) System
This system includes 3V control valve, electronic
module and intermittent pilot.
WARNING: 110-120 VAC MUST NEVER
!
BE CONNECTED TO A CONTROL
VALVE IN A MILLIVOLT SYSTEM.
NAILING TABS
AT BASE OF
FIREPLACE.