Preparations - XTZ 99.26 MKII User Manual

Crossover /
Binding post

Preparations

Unpacking
Accessories
The copper plating of the top and bottom plates
along with a solid copper phase plug improves the
heat conduction and thus contributes to the high
power durability.
Gold plated terminals reduce contact resistance
and serves as anti-corrosion.
Large windows in the basket both above and below
the spider reduces sound reflection, air flow noise
and cavity resonances.
We have selected a -12 /18 dB crossover that has a
fast transient response and a minimum of phase
shifting.
The connectors are gold plated bi-wiring types so
you can connect to the amplifier with double cables
(bi-wiring), or connect to two amplifiers (bi-amp-
ing) for further improvement of the sound. The fol-
lowing connecting methods are available:
1. Upper terminal + lower terminal (loops
present)
Default setting, the loudspeaker is fed with the en-
tire frequency range.
Without the loop between upper and lower termin-
al:
2. Upper terminal. The signal is only fed to the
tweeter.
3. Lower terminal. Now the signal is fed to the
woofer only.
Carefully unpack the speaker, and pay attention so
you don't break anything. If possible, save the box
for future transportations. If there should be
damage to the loudspeaker, please contact your
retailer.
Bass reflex plug
User manual
Rubber feet
Loops for level adjustment
Page: 5