Camera Setup - Honeywell Tuxedo Touch User Manual

ICON
To set a picture as wallpaper:
1. Use the slide bar to scroll through the list of
pictures and highlight the file you want to be
displayed on the keypad screen.
2. Press the Set Wallpaper icon; view your selection
from the "Home" screen.
Picture Icons
Previous
Play Image
Image Image

Camera Setup

The Camera feature allows you to enroll cameras and view up to four cameras at one time using the quadrant view feature. If
using existing (mounted) cameras, go to Step 4 below. If this is a first time setup, scan/configure the cameras prior to
mounting. View the "IP Camera Setup" training video and then follow the steps below.
ICON
1. Connect an Ethernet cable to the back of
your camera (LAN); connect the opposite
end to the Ethernet port on the router.
2. Apply power to the Camera. It may take a
few seconds for initial power-up of camera.
3. Press the Multimedia and Camera icons (or
press the Camera icon from the "Home"
screen); then press the Camera Setup icon.
4. Press the Discover icon to locate the
camera. The screen displays:
Cameras Please Wait..."
5. Press the Add icon (if the camera
information is not discovered automatically)
to enter required information.
6. To edit camera information, highlight the
camera name and press the Edit icon.
Highlight each field and enter the required
information, and then press Save.
a) To retrieve camera settings and connect to
the camera, press the Connect icon or,
Multi-Media (cont'd)
ACTION
Deselect
Next Add
Set
Image
Image
Wallpaper
ACTION
"Discovering
NOTE: On the "Home" screen press the Minimize Home icon to
reduce the "Home" screen icons and to have better visibility of the
Wallpaper.
Press the Maximize Home icon to maximize the "Home" screen
icons.
Maximize Home
Minimize Home
NOTES
Notes:
®
1. QuickTime media player must be installed on your PC.
2. Camera viewing is not compatible if using Opera web browser.
3. Do not use ports 6665-6669 for camera HTTP configuration. These ports
will block MPEG streaming and PT commands of Safari based PC and
mobile devices.
IMPORTANT: Use the web browser to view cameras for non-security
purposes only. Camera streams viewed from the web browser can stop
without indication due to network connection issues.
Use the Data Entry Keyboard to enter all required information.
• Press the Up Arrow key to switch to upper case characters
• Press the X key to delete
• Press the ABC/.?123 key to switch between numerals and
symbols/characters.
•
Press GO to return to the previous screen.
Note: For best performance set video resolution to 320 x 240, 8 frames per
sec, Normal quality.
Add/Edit Options:
Name: Enter a camera name. Address: Enter IP or URL.
RTSP Port #: Select from (554, (1024-65534)).
Model: Select from iPCAM-WI, iPCAM-WI2, iPCAM-WI2B (black), iPCAM-
WO, iPCAM-PT, WVC210, or other.
User Name: Enter a user name, if desired.
26
NOTES