How To Add An Existing User To A Second Keypad; How To Delete A User; How To Edit A User - Honeywell Tuxedo Touch User Manual

ICON
6. Type in the user name (6 characters
max.; no spaces between characters) and
press the OK icon.
7. Press the box next to User Number and
enter an "available" (3-digit) user
number; press the OK icon.
8. Press the box next to Enter User Code,
enter the 4-digit User Code for this user
and press the OK icon.
9. Press the box next to RF Button Zone
(if used); enter the 3-digit RF Button
Zone for this user.
10. Press the Save icon.

How to Add an Existing User to a Second Keypad

After adding a user to the first keypad, the same user can be added to a second keypad. From the second keypad go
to "User Setup" and enter the same user name and same user code (refer to "How to Add a User" above). The second
keypad will automatically update the user information. Press Save.

How to Delete a User

ICON
1. Select the User you want to delete.
2. Press the DELETE USER icon.
3. Enter your Authorized code.
4. Press the appropriate icon.
The Confirm Delete screen is displayed.

How to Edit a User

Note: You cannot edit a User's name or number. To modify a User name or number, you must delete the User and re-enter User.
Edit a user as follows:
ICON
1. Press the EDIT USER icon.
2. Enter your Authorized code.
3. Select the options needed for this user
and press the Save icon.
User System Setup (cont'd)
ACTION
The authorized code for adding users is dependent upon the alarm panel you
are interfacing with. Check your alarm panel Installation and Setup Guide to
determine who can add users.
If assigning this user to wireless key, enter one of the zone numbers of the
keyfob (the wireless key must be programmed first before it can be assigned to
a user).
Select the partitions, access level, and enter an available user number for this
user.
For available user numbers, refer to the control panel instructions.
ACTION
Three selections are available: add a user, edit a user, or delete a user.
The authorized code for deleting, adding, and editing users is dependent upon
the alarm panel you are interfacing with. Check your alarm panel Installation
and Setup Guide to determine who can delete, add, and edit users.
ACTION
Three selections are available: add a user, edit a user, or delete a user.
Note: The authorized code for deleting, adding, and editing users is
dependent upon the alarm panel you are interfacing with. Check your alarm
panel Installation and Setup Guide to determine who can delete, add, and edit
users.
When you select Save, the configuration changes are saved and you are
returned to the User Setup screen.
NOTES
NOTES
NOTES
29