Honeywell Tuxedo Touch User Manual page 39

Automation (cont'd)
Scene Icons Condition/Trigger/Action Icons
Add Delete
Edit Save
LOG
DELETE EDIT
ADD
Scene Rules
• Triggers and Conditions include: Time setting, Security mode, Thermostat setting, and Door status.
• Actions include: Security mode, Lights on/off, Thermostat setting, and Door Lock status.
• Each Trigger event can have up to 3 Actions.
• A Trigger event and Condition cannot be the same (i.e., if setting a Trigger event for SECURITY, you cannot set a SECURITY
Condition).
• A total of 10 Scenes can be created.
Note: Determine if you need a Condition. The Condition is a 'condition' set to occur prior to a trigger event. See example below.
Example: Turn the lights on, when the system is disarmed, only at night.
(Condition) ... "only at Night" ...Set the TIME condition (enter the Start Time and Duration).
(Trigger) ......when the "system is Disarmed" ...Set the Trigger to SECURITY: System Disarm.
(Action) ... Turn the "lights ON" ... ... Set the Action to LIGHT: ON.
39