Electrolux GLDB957JB series Service Manual page 64

24" built-in dishwashers electronic control (update) precision wash system
Table of Contents

Advertisement

Color Code
BK......................... Black
BK-W...........Black/White
BU............................Blue
PK............................Pink
R...............................Red
R-BK...............Red/Black
R-Y................Red/Yellow
VIO.........................Violet
W...........................White
W-BK...........White/Black
The water/service test is a special function
initiated from the power failure mode or idle
mode.
While in power failure mode
press the NO HEAT DRY/POWER DRY OFF and
START/CANCEL pads for 1 1/2 seconds.
The dishwasher will then step through the test
cycle per the chart. Pushing the START/CANCEL
pad will advance the dishwasher to the next step.
While in idle mode
- simultaneously press
HI-TEMP WASH & START/CANCEL pads for
1 1/2 seconds.
POTS & PANS
NORMAL WASH
LIGHT (BOTH)
LIGHT (UPPER)
LIGHT (LOWER)
CHINA/CRYSTAL
RINSE HOLD
SENSING
WASHING
RINSING
DRYING
CLEAN
WATER VALVE
DRY SYSTEM
PUMP MOTOR
DRAIN MOTOR
HEATER
DISPENSERS
TURBIDITY SENSE
Operation
Water/Service Test
- simultaneously
9v†ƒyh’Ã8‚qr†ÃSrhq‚ˆ‡
LO
....Low liquid in the rinse aid dispenser
PF
.....A power failure has occurred
HO
....Water heating delay
CL
.....Close and latch the door
'01-09'
....Hour(s) delay before start
Cycle Selection Options
9v†ƒyh’Ã8‚qr†ÃG@9
@I DIB
---------------------- Turbidity sensor is checking the condition of the wash/rinse water.
No sensing for LIGHT WASH (UPPER RACK), LIGHT WASH (LOWER RACK) and CHINA/CRYSTAL.
X6 CDIB
----------------------Wash portion of cycle.
SDI DIB
----------------------- Rinsing portion of cycle.
9S`DIB
------------------------Drying portion of cycle.
8G@6IÃ
-------------------------Shows completion of cycle. Indicator light will switch off when door is opened.
PQUDPIÃG@9†ÃAyh†uvt
-- HI-TEMP WASH and NO HEAT DRY/POWER DRY OFF LED's flashing indicates power failure has
occurred. Press START/CANCEL pad and reselect desired options and cycle.
U6UV ÃG@9†ÃAyh†uvt
-- The STATUS LED's that are lit when the door is opened will flash. Close door.
v…vtÃ9vht…h€
*TURBIDITY
SENSOR

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents