Figure 3 Install Mini-Pcie Module; Figure 4 Remove Bottom Chassis Cover - Quanmax KUBE-8040 User Manual

3. Place your mini-PCIe module toward the mini-PCIe socket.
4. Tightening the screw on the hole of the mini-PCIe module as shown below.
(Bottom Cover)
1. Loosen the 6 flathead screws from right and left side of the computer.
2. Remove the chassis bottom cover off the chassis base.
3. Then you could Install/Remove the HDD and CF as shown below.
KUBE-8040 User's Manual

Figure 3 Install mini-PCIe Module

Figure 4 Remove Bottom Chassis Cover

20