If the Authentication type is WPA-PSK , WPA2-PSK or WPA-PSK/
WPA2-PSK , the bottom part of the configuration page displays
WPA parameters.
WPA Algorithm: TKIP, AES or AUTO.
•
•
Pass phrase: You can input hexadecimal digits up to 64
characters or input ASCII characters choose a length of 63
characters or less.
•
Key Renewal Interval: Define how long the key should be
renew.
You can set Wireless MAC Filtering:
•
Wireless Disable: If disabled, MAC address is not used to
control network access.
•
Wireless Allow: Set the MAC address that is allowed to access
network.
•
Wireless Reject: Set the MAC address that is not allowed to
access network.
Click Apply to confirm your configuration.
WPS
Select Wi-Fi Setting > WPS, the WPS configuration is shown in the
following figure:
Select Enable, click Apply ,the WPS settings are shown in the fol-
lowing figure:
31