Zte MF29A User Manual page 23

• Profile Selection: Choose the desired profile name.
• APN: Access Point Name.
• PDP Setting: PDP address mode. If a fixed IP address is given
by your service provider, select Manual PDP. Otherwise select
the Auto PDP and the router will automatically obtain this
parameter.
• DNS: If a fixed IP address is given by your service provider, then
choose Manual DNS. Otherwise, choose Auto DNS, and device
will automatically obtain parameters.
• Authentication: Password Authentication Protocol (PAP)
provides a simple method without encryption for the peer to
establish its identity using a 2-way handshake. Challenge-
Handshake Authentication Protocol (CHAP) is used to
periodically verify the identity of the peer using a 3-way
handshake.
• User Name: User name is used to obtain authentication from the
ISP when the connection is established
• Password: Password is used to obtain authentication from the
ISP when the connection is established.
Click Set default to set this profile as the default profile.
23