The HT physical Mode parameters are shown below:
•
Operating Mode: In Mixed Mode, packets are transmitted with
a preamble compatible with the legacy 802.11a/g, the rest of
the packet has a new format. In Green Field, high throughput
packets are transmitted without a legacy compatible part.
•
Channel Bandwidth: Set the HT physical channel bandwidth.
•
Guard Interval: Guard interval is to introduce immunity to
propagation delays, echoes and reflections, to which digital data
is normally very sensitive.
•
MCS: The Modulation and Coding Scheme (MCS) is a value
that determines the modulation, coding and number of spatial
channels.
•
Reverse Direction Grant(RDG): Enable RDG or not.
•
Extension Channel: Set extension channel. Extension channel
is also able to send and receive data.
•
Aggregation MSDU(A-MSDU) :To enable Hyper Throughput TX
Aggregate MAC Service Data Unit, select Enable.
Auto Block ACK: Select to block ACK (Acknowledge Number)
•
or not during data transferring. When you enable the WDS
function, you should set to enable Auto block ACK to preventing
the other effect during data transferring.
•
Decline BA Request: Select to reject peer BA-Request or not.
Click Apply to confirm your configuration.
Advanced
Select Wi-Fi Setting > Advanced, the advanced wireless network
parameters are shown in the following figure:
27