Zte MF275R Quick Start Manual
Hide thumbs Also See for MF275R:

Advertisement

ZTE MF275R
Quick Start Guide
1

Advertisement

Table of Contents
loading

Summary of Contents for Zte MF275R

  • Page 1 ZTE MF275R Quick Start Guide...
  • Page 2: Legal Information

    ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No. : R1.0...
  • Page 3: Getting To Know Your Device

    Getting to Know Your Device The device operates on the 4G/LTE networks and supports voice and data service. Appearance...
  • Page 4 1. micro-SIM card slot Insert your micro-SIM Card. 2. Reset button Reset your device. 3. External antenna To attach antenna. connector 4. WPS button To activate the WPS Function. Standard RJ11 connector for the 5. Phone telephone 6. LAN Ethernet connector to computer Connector to the external power 7.
  • Page 5 More than 50% discharging Green steady (charger not present) Green More than 50% charging blinking (charger present) 20%-50% discharging Yellow steady (charger not present) Battery Yellow 20%-50% charging (charger blinking present) Less than 20% Red steady discharging(charger not present) Less than 20% charging Red blinking (charger present) Battery not present...
  • Page 6 Connected to the LTE Green steady network Green Roaming (LTE network) blinking Connected to the 4G Yellow steady Network network Yellow Roaming(4G network) blinking No service, limited service, searching for network, no Red steady SIM Card or other abnormal status Green steady Strong signal Signal Yellow steady Weak signal...
  • Page 7: Installing The Micro-Sim Card And Battery

    Installation Guide Installing the micro-SIM Card and battery 1. Slide the back cover and remove it 2. Insert the battery.
  • Page 8 3. Install the micro-SIM Card. WARNING! • Switch off your device before installing or replacing the micro-SIM card. Your device does not support placing or inserting the micro-SIM Card while switched to the ON position. • Your device only supports micro-SIM Card. To avoid damaging the device, please use the card that comes installed or included in the box of the device.
  • Page 9: Connecting Your Device

    Before You Begin You can charge your device by using an adapter: • Insert the charger lead carefully with the plug arrow facing the bottom of the device. • Do not use excessive force to insert the plug. • Make sure the plug is facing the right way, and lined up correctly.
  • Page 10: Switching On Your Device

    Switching On Your Device 1. Press and hold the Power Switch to get started. Make sure that the phone is on the hook before you power it 2. Wait 1 ~ 2 minutes and then the Power and battery indicator should be lit on. Connecting to the Internet Via Ethernet 1.
  • Page 11 2. Go to your favorite website on the PC connected to your device via Ethernet cable to confirm your Internet connection. Via Wi-Fi 1. Use the Wi-Fi application on a client to search for available wireless networks.
  • Page 12 NOTE: The client will obtain an IP address automatically. 2. Select the SSID of your device, and then click Connect. NOTE: You can find the default SSID on the label (under the back cover) of your device.
  • Page 13 3. Enter the password, and then click OK. NOTE: Please refer to the detailed User Guide online at http://www.bell.ca/wirelesssupport. 4. Wait until the client is connected to your device successfully. 5. Go to your favorite website to confirm your Internet connection.
  • Page 14: Configuring Your Pc

    Configuring Your PC The following procedure describes how to configure the Internet Protocol in the Windows 7 for your Wi-Fi connection. 1. Right-click Network and select Properties. 2. Select Change Adapter Settings.
  • Page 15 3. Right-click Wireless Network Connection and select Properties.
  • Page 16 4. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
  • Page 17 5. Select Obtain an IP Address Automatically and Obtain DNS Server Address Automatically, and click For more information, please refer to the detailed User Guide online at http://www.bell.ca/wirelesssupport.

Table of Contents