Installation; Inserting (U)Sim Card - Zte MF29A User Manual

2. PSTN: Standard RJ11 connector for PSTN.
3. WAN/LAN: Ethernet connections to internet. In 3G Gateway
mode, it is LAN connector. In Cable broadband and Bridge
mode, it is WAN connector.
4. LAN1~LAN3: Ethernet connections to computer.
5. Reset: Reset button
6. ON/OFF: Turn the router ON or OFF.
7. ANT: Connect to external antenna.
8. PRESS ANT ON: To switch between internal antenna and
external antenna modes. By default setting, the router uses the
internal antenna. When you connect the router with the antenna
through ANT port, you can press ANT ON to change the router
from the internal antenna mode to external antenna mode.
Press ANT on again to change back.
Note: If you press ANT ON without using external antenna, the RSSI
signal of the router will be poor.
9. POWER Socket: Connection to the external power supply.

Installation

Inserting (U)SIM Card

Insert the (U)SIM card into the (U)SIM port.
10