Install the mezzanine card in the mezzanine assembly, and then tighten the mezzanine card screws to
6.
secure the card to the mezzanine assembly.
Align the mezzanine assembly with the guide pins on the system board, and then install the mezzanine
7.
assembly on the system board.
Press down firmly on the mezzanine assembly handles, and then close the mezzanine assembly latch.
8.
Install the access panel (on page 14).
9.
Install the server blade
10.
FBWC capacitor pack
To install the component:
Power down the server blade (on page 12).
1.
Remove the server blade (on page 13).
2.
("Installing a server
blade" on page 21).
Hardware options installation 37