Section 3.0 Setup And Operation; Setup Procedure - BIO RAD PowerPac 200 Instruction Manual

POWER PAC
3.0 SETUP AND OPERATION
Step Procedure
1. Connect the electrophoresis
cell(s) to the power supply.
– +
2. Turn on the power.
3. Select the constant parameter.
V
CONST
A
4. Enter the constant value.
Table 2.

Setup Procedure

Description
The power leads are color coordinated to the output terminals.
indicates high voltages may be present.
a. Press the switch, located on the side of the unit.
Power
(Press the side labeled "l" on the switch.)
b. The settings displayed are constant voltage and 0V.
PowerPac 300
V
mA
PowerPac 200
V
A
: The PowerPac 200 and PowerPac 300 return to these
Note
settings each time the unit is turned off.
Press the key to select constant voltage (V) or con-
Constant
stant current (mA or A).
Use the keys to enter a value.
Scroll
Setup and Operation
V
CONST
A
V
CONST
A
7