Cables - Digital Equipment LA75 plus companion User Manual

1.5.1 Cables

For specific information on cables, see Section 7.6 in Chapter 7.
1.5.2 Printing a File
Refer to your computer system documentation for information about operating
the printer with your computer. Your computer or terminal may require printer
set-up before it can operate with the printer.
If your computer does not require printer set-up, you can print a file as follows:
1 Turn your computer or video terminal on.
2 Turn the power switch on the LA75 Plus to 1 (on). The printer is ready to
print.
3 Make sure there is paper in the printer, and that you have advanced the
paper (by pressing the FF switch) to the print position. Do NOT turn the
platen knob to manually advance the paper.
4 Follow the instructions in your computer system's documentation on
printing a file.
Note: When the LA75 Plus is connected to two computer systems at the same
time, the printer can accept data to print from either one only if it has been
idle for two seconds.
1
Only turn the platen knob to manually clear a paper jam.
1
Installing the Printer 1–19