Codes; Safety Information - HearthStone Phoenix 8612 Owner's Manual

Non-catalytic wood stove
Hide thumbs Also See for Phoenix 8612:
Table of Contents

Advertisement

The performance of your stove depends on
many variables. Since all installations are
unique, the general information and operating
procedures presented here can only serve as
useful guidelines rather than hard and fast rules.
Should you have any questions, do not hesitate
to
contact
your
information.
This stove is manufactured and warranted by:
HearthStone
Quality
Products, Inc®
317 Stafford Ave.
Morrisville, VT. 05661
C
ODES
When installing your Phoenix wood stove, it is
imperative that you adhere to all local codes,
which can be obtained from either of the
following two National sources:
American National Standards Institute, Inc.
(ANSI)
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
(NFPA)
Battery March Park
Quincy, MA 02269
If you are installing your Phoenix in a mobile
home, follow the guidelines described in the
Manufactured Home Construction and Safety
Standard, Title 24 CFR, Part 3280 (United
States).
S
I
AFETY
NFORMATION
ead and understand this Owner's Manual
R
thoroughly before installing and using this
stove.
Make sure to install your stove:
According
to
recommendations
HearthStone Quality Home Heating Products Inc ®
dealer
for
additional
Home
Heating
the
manufacturer's
In accordance with all applicable codes
With the proper sized chimney
When using your stove:
Warn children and others unfamiliar with
woodstoves of the danger of touching hot,
radiating surfaces of your stove. For your
additional safety, obtain hearth, and stove
guards through your local dealer.
Follow recommended break-in procedure as
outlined in this manual.
Burn natural wood only. Higher efficiencies,
and lower emissions result when burning
air-dried, seasoned wood, as compared to
green or freshly cut wood.
Use caution when loading firewood into a
hot stove.
Keep the front door tightly closed at all
times except when loading wood.
Keep the ash pan tray fully inserted and the
ash door closed tightly.
Inspect the stovepipe, chimney connector,
and chimney as recommended.
Be sure the removable ash lip is in place
while using the stove. If the ash lip is not
installed properly, the hearth surface may
exceed safe temperatures.
Follow these safety precautions:
Never modify this stove in any way,
especially the primary air control system.
Never burn kiln dried wood, painted or
treated wood, solvents, trash, plywood,
colored or glossy paper, artificial logs,
cardboard, coal, garbage, or driftwood.
Especially, do not burn coal in this stove.
3
Phoenix Model 8612

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents