Table of Contents
Advertisement
- - - - - - - -
SAFETY WARNING
Read This Booklet
This booklet is designed to help a certified installer install, begin operation of and troubleshoot
the Grundfos Versa Flo UPS pumps. It should be left with the owner ofthe pump for future reference
and information regarding its operation. Should the owner experience any problems with the
pump, a certified professional should be contacted.
Electrical Work
All electrical work should be performed by a qualified electrician in accordance with the latest
edition of the National Electrical Code, local codes and regulations.
Shock Hazard
A faulty motor or wiring can cause electrical shock that could be fatal, whether
touched directly or conducted through standing water. For this reason, proper
grounding of the pump to the power supply's grounding terminal is required
for safe installation and operation.
In all installations, the above-ground metal plumbing should be connected to the power supply
ground as described in Article 250-80 of the National Electrical Code.
Risque de choc electrique
Un moteur ou un diblage defectueux peuvent causer un choc electrique qui
pourrait etre fatal, soit par contact direct, soit par conduction
a
travers de I'eau
stagnante. II faut done mettre la pompe
a
la terre sur la borne de mise
a
la terre
de la source d'alimentation afin d'assurer une installation et un fonctionnement
secu rita ires.
Pour tous les types d'installations, la plomberie en metal de surface devrait
etre raccordee
a
la mise
a
la terre de la source d'alimentation, tel qu'indique
a
l'Articie 250-80 du Code national de I'electricite.
PRE-INSTALLATION CHECKLIST
1.
Confirm You Have the Correct Pump
• Read the pump nameplate to make sure it is the one you ordered.
• Compare the pump's nameplate data and its performance curve (for head,
GPM, etc.) with the application in which you plan to install it.
• Will the pump do what you expect it to do?
2.
Check the Condition of the Pump
The shipping carton your pump came in is specially designed around your pump
during production to prevent damage. As a precaution, it should remain in the carton until
you are ready to install it. At that point, look at the pump and examine it for any damage
that may have occurred during shipping. Examine any other parts of the shipment as well
for any visible damage.
Page 1
Advertisement
Table of Contents
