Priority Channel Scan Feature - Uniden PMR845-2CK Owner's Manual

UT009ZH_PMR845-2CK_E_1207
To turn the channel scan OFF:
Press the SEL/
the CH/SCAN key for 2 seconds.

Priority Channel Scan Feature

Your PMR845-2CK radio has a priority channel scan feature
that allows you to scan between current channel and priority
channel. When an active channel is detected, the radio will
pause on that channel until the channel is clear. Then after a
3 second pause, the radio will continue scanning. Pressing
the PTT button while the scan is paused on a channel will
allow you to transmit on that channel.
To select the priority channel:
1) Press the PRI/BABY key. The PRI
icon and the priority channel will
blink.
2) Press the L or M key to increase or
decrease the priority channel number
displayed.
3) Press the SEL/
channel will blink.
4) Press the L or M key to increase or decrease the code
number displayed.
5) To start the priority channel scan, press the SEL/
To exit the priority channel scan:
Press the PRI/BABY key.
Any problems call our helpline on 0845 2265664 (local call rate)
12/7/05
, CALL key, PTT button, or press and hold
key. Then the CTCSS code of priority
11
12:53 PM Page 11
USING THE RADIO
key.