If you replace or substitute any unique parts (including crystals, transistors, IC’s, regulator diodes, etc.) with parts other than those recommended by Uniden, you may be in violation of FCC technical regulations (in Part 95) or type acceptance requirements (in Part 2) of the FCC rules.
INCLUDED IN YOUR PACKAGE If any of these items are missing or damaged, immediately contact your place of purchase or Uniden’s Parts Department. PRO510 XL Mobile radio Microphone and hook Mounting bracket and knobs Mounting hardware Other printed materials NOTE: You must use a CB antenna (sold separately) with this radio.
PARTS OF THE RADIO Front 1. ANL Switch Activates the Automatic Noise Limiter feature, which reduces background noise from the car engine and other sources. 2. TX LED Indicates when the radio is transmitting. 3. S/RF (Signal/RF) Meter Shows the strength of the received signal or the RF output. 4.
Page 5
Back MODEL: PRO510XL FCC ID SERIAL NO: 9. Model number label Shows the radio model number, FCC ID number and serial number. 10. Antenna Connector Connects to a male PL-259 external antenna cable (antenna sold separately). 11. External Speaker Jack Connects to a ⅛-inch (3.5 mm) external speaker (sold separately).
INSTALLATION Connect the microphone Align the microphone connector with the jack on the front of the radio. Push the connector in firmly and secure it with the locking screw. Connect the power You can connect the radio to any standard 12 volt DC power source, with either a positive or negative ground.
Connecting an external antenna You will need to purchase an antenna to operate the radio. However, Your Uniden dealer can help you select the antenna that is best for your needs. Consult the specifications in the back of this manual for detailed transmitter and antenna information.
► Inspect all screws and other mounting hardware. TROUBLESHOOTING If your radio is not performing to your expectations, please try these simple steps. If these steps don’t solve your problem, call the Uniden Customer Service Center. Problem: Things to try: 1.
SPECIFICATIONS eneral Channels 40 AM Frequency Range 26.965 to 27.405 MHz Frequency Control Phase Locked Loop (PLL) synthesizer Frequency Tolerance ±0.005% Operating Temperature -30ºC to +50ºC Microphone Plug in type, dynamic Input Voltage 13.8 V DC nom. (+ or - ground) Current Drain TX full mod., 1.7A with max.
Changes or modifications to this product or use of accessories not expressly approved by Uniden, or operation of this product in any way other than as provided in the Uniden Owner’s Manual could void your authority to operate this product.
Page 11
The product should be shipped freight prepaid, by traceable means, to warrantor at: Uniden America Service 743 Henrietta Creek Rd. Roanoke, TX 76262...
Need help?
Do you have a question about the PRO 510XL and is the answer not in the manual?
Questions and answers