AEG SOLO 10 User Manual page 20

19
• Press to return to standby mode.
Note:
If you select "ECOnOMY", the answering machine will answer an incoming call on the fifth ring if you have
no previous new messages and on the third ring if you do.
When you call your answering machine to check messages, if it does not answer on the third ring, then you
can hang up immediately, knowing that you have no new messages. This feature can save you the cost of
a long-distance call when you check your messages remotely.
16.3.2 Activate/Deactivate Remote Access
• From the home screen, press
• Press to "AnSW MACHInE" and then press
• Press to "SETTInGS" and then press
• Press to "REMOTE ACC." and then press
• Press to select "ACTIVATE" or "DEACTIVATE" and then press
>A confirmation tone is played.
• Press to return to standby mode.
Note:
Once the remote control access is activated, you can check the messages on your answering machine
when you are away from home, by calling from another phone.
The Master PIn is used for accessing the answering machine remotely. If your answering machine is off,
you must change your Master PIn from its default 0000 before you can use the remote access feature to
turn on your answering machine.
16.3.3 Change the Voice Language
You can select a different language for the answering machine's pre- recorded outgoing message. The
default setting is "EnGLISH".
• From the home screen, press
• Press to "AnSW MACHInE" and then press
• Press to "SETTInGS" and then press
• Press to "LAnGUAGE" and then press
• Press to select your preferred language and then press
>A confirmation tone is played.
• Press to return to standby mode.
16.4 Message Playback
When there are new messages on the answering system, the tape icon flashes on the handset screen.
• From the home screen, press
• Press to "ANSW MACHINE" and press
• Press to select "PLAY".
>Your messages will automatically playback through the handset's speakerphone.
>Press to listen to your messages privately through the earpiece of your handset.
• During playback, press
REPEAT Repeat the currently playing message
NEXT Play the next message
PREVIOUS Play the previous message
DELETE Delete the current message
• Press to return to standby mode.
16.5 Delete All Messages
Note:
Only old messages can be deleted. new messages must be played before they can be deleted.
.
to select.
.
to select.
to select.
.
to access the following options:
to select.
to select.
to confirm.
to select.
to confirm.
to select.