General Operations - Hyundai H-LCD2209 Operation Manual

General operations

Press the POWER button on the unit or the remote control to switch on the power; the indication light
will be in blue color. Press the POWER button again to switch off the power, and the light will be in red
color.
The Picture setup, Sound setup, Previous channel can be memorized before you switch off the
TV/Monitor. The TV/Monitor will re-start under the previous state when you switch on it again.
Press the VOL - or VOL + button to adjust the volume output.
Press the SLEEP button to set the sleep time
Press the AV/TV button on the remote control to select the TV function mode. Press the CH- or CH+
button to select the previous or next channels; or press the 0-9 buttons to enter a channel number
directly, or press the -/-- button until the screen display '-' or '--', then use the 0-9 numerical buttons to
enter a channel number from 1 to 99.
Press the
channel.
Press the PMODE button repeatedly to cycle through the available video picture modes from the below
6 types
Standard
Personal
Press the SMODE button to repeatedly to cycle through the available sound modes from the below 4
types.
Music Theatre
Press the MUTE button to cut off the sound output, press this button again to resume sound output.
Press the DISPLAY button to display the preset TV channel play information.
AV signal sources (DVD/VCR/CAMCORDER)
Press the AV/TV on the remote control, here will be a menu displayed on the screens right
figure:
Select the suitable input to pickup the AV signal.
Press or button to select source, then press
TELETEXT
See decryption of the Teletext functions in Remote Control operation description (18th item).
button on the remote control to select from the present channel and the previous
Movie
Game Mild
Personal
Sport
Voice
button to confirm your selection.
10
TV
SCART
CVBS
S-VIDEO
VGA
HDMI