General Operations - Hyundai H-LCD1509 Instruction Manual

General operations

Press POWER button on the unit or the RC to switch on the power; the indication light will be in blue
color. Press POWER button again to switch off the power, and the light will be in red color. The Picture
setup, Sound setup, Previous channel can be memorized before you switch off the unit. The unit will re-
start under the previous state when you switch on it again.
Press VOL- or VOL+ button to adjust the volume output.
Press SLEEP button to set the sleep time.
Press AV/TV button on the remote control to select the TV function mode. Press CH- or CH+ button to
select the previous or next channels; or press the 0-9 buttons to enter a channel number directly, or press
the -/-- button until the screen display '-' or '--', then use the 0-9 numerical buttons to enter a channel
number from 1 to 200.
Press LAST CHANNEL button on the RC to select from the present channel and the previous channel.
Press PMODE button repeatedly to cycle through the available video picture modes from the below 4
types
User => Normal => Soft => Vivid
Press SMODE button to repeatedly to cycle through the available sound modes from the below 4 types.
User => Normal => News => Movie
Press MUTE button to cut off the sound output, press this button again to resume sound output.
Press DISPLAY button to display the preset TV channel play information.
AV signal sources (DVD/VCR/CAMCORDER)
Press AV/TV on the RC, here will be a menu displayed on the screen right figure:
Select the suitable input to pickup the AV signal.
Press UP/DOWN cursor buttons to select source, then press LEFT/RIGHT cursor buttons
to confirm your selection.
TELETEXT
See decryption of the Teletext functions in the Remote Controller operation description (18th item).
10
TV
AV
SVIDEO
SCART
PC