General Operations; Signal Sources; Teletext Operations - Hyundai H-LCD1516 Instruction Manual

Operation

General operations

• Press POWER button on the unit or on
the RC to switch on the power, the indication
light will be in blue color. Press POWER button
again to switch off the power, and the light will
be in red color.
• Press VOL- button repeatedly to decrease
the volume; press VOL+ button repeatedly to
increase the volume.
• Press SLEEP button repeatedly to set the
sleep time (from 0 to 120 min). To check the
remaining sleep time, press SLEEP button;
the time remaining until the unit is off will be
displayed.
• Select the TV function mode. Press
PROGRAM-/PROGRAM+ buttons on the
RC or CH-/CH+ buttons on the unit to select
previous or next channel; or press number
buttons to enter a channel number directly;
or press [-/--] button until the screen displays
'-' or '--', then use number buttons to enter a
channel number from 1 to 99.
• Press button on the RC to select
from the present channel and the previously
displayed channel.
• Press P.MODE button repeatedly to cycle
through the available video picture modes from
the following 4 types: Standard => Movie =>
Vivid => Personal.
• Press S.MODE button repeatedly to cycle
through the available sound modes from the
following 4 types: Standard => Movie => Music
=> Personal.
• Press MUTE button to cut off sound, press
this button again or adjust volume to resume
sound.
• Press INFO button to display the preset
TV channel play information including channel
number, color/sound system, etc.
• Press ASPECT button repeatedly to select
a screen display size from the available list:
Full => Zoom => Subtitle => 4:3 => 14:9 =>
Auto. Available aspects may differ for different

signal sources.

• This function is only available if the
8
channel has NICAM signal. Press AUDIO I/II
button on the RC repeatedly to select mono/
NICAM mono/stereo/Main dual/SUB dual,
depending on the NICAM signal style.
Signal sources
Press SOURCE button on the RC, then
press / cursor buttons to cycle
through the available source list as follows: TV
- HDMI - SCART - AV - S-VIDEO - VGA. Press
cursor button or OK button to confirm.

Teletext operations

• In TV mode select a TV channel in order to
pick up the picture signal of Teletext.
• Teletext button functions are as follows:
Press number buttons (0~9) on the RC to
select a teletext of corresponding number.
Press / buttons to go the previous
or next teletext page.
TTX/MIX: Press this button to enter into
Teletext mode. Press this button again to
display TV image and teletext at the same time.
Press this button again to exit Teletext mode.
CANCEL: Press this button to hide the
teletext page content. Press this button again
to display the content.
SIZE: Press this button to enlarge the
content of upper part of the page. Press this
button again to enlarge the content of lower
part of the page. Press this button third time for
normal size text page view.
HOLD/FAV: Press this button to stop the
move to the next page. Press this button again
to cancel operation.
INDEX: Press this button to go to the index
page.
REVEAL: Press this button to reveal the
concealed information. Press this button again
to hide the information.
SUBPAGE: Press this button to select sub-
page (if available). Enter the number of sub-
page. The teletext will search for the sub page.
Red/Green/Yellow/Cyan buttons: Press
these 4 color buttons to access directly to
corresponding color page displayed at the
lower part of teletext screen.