Honeywell STT850 SMARTLINE User Manual page 48

LRV
URV
MRV
Damping
NAMUR Output
Tag ID
Page 38
Install Date
#. ##
#. ##
#. ##
Enabled
Disabled
STT850 Temperature Transmitter User's Manual
DD MM YYYY.
This selection allows the user to
enter the date a transmitter is
installed.
The Install Date is entered in
sequence of Day, Month, and
Year, followed by the new date
and the prompt Write Date to
confirm the entry.
CAUTION: The Install Date can
only be written once in the life of
the Transmitter. You cannot erase
or overwrite the Install Date once it
has been written.
The limits are:
the Lower Range Limit (LRL) and
the Upper Range Limit (URL) of
the selected Sensor 1 ID
Limits are the minimum URL and
maximum LRL of the selected
Sensor 1 and Sensor 2 IDs.
Determines the point of transition
of Loop Control between Sensor 1
and Sensor 2 for Split-Range Loop
Control Mode.
Selection applies digital filtering to
suppress noise effects on the PV.
The limits for this value are 0.0 to
32.0 seconds
Disabling sets the loop output and
burnout levels to the Honeywell
levels
Enter Tag ID name up to 8
characters long.
= any Alphanumeric value
Press ↵
↑ and ↓ to select
↵ to enter and
number
shift to next digit
to the right.
Press ↵ to enter
menu selection
↑ and ↓ to
select number.
↵ to enter and
shift to the next
digit to the right
Press ↵ to enter
menu selection
↑ and ↓ to
select from list
↵ to enter
Press ↵ to enter
menu selection
↑ and ↓ to select
Alphanumeric
↵ to enter and
shift to next
character to the
right.
Revision 1