Installing and removing drives
In the standard model the device may be equipped with the following drives:
●
one accessible 3 ½ inch drive (floppy drive)
●
one non-accessible 3 1/2 inch drive (hard disk)
●
one accessible 5 ¼ inch drive (e.g. DVD or CD ROM drive)
or:
●
two non-accessible 3 ½ inch drive (hard disk)
●
one accessible 5 ¼ inch drive (e.g. DVD or CD ROM drive)
"Accessible drives" are e.g. DVD or CD ROM drives, into which a data carrier can be inserted from
outside. Non-accessible drives are e.g. hard disks.
IDE drives and serial ATA drives
By default IDE drives and serial ATA drives are supported (also see the manual for the mainboard).
Fujitsu Technology Solutions
System expansions
55