Fujitsu ESPRIMO E5635 Operating Manual page 42

Troubleshooting and tips
Wrong monitor has been set under Window XP
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu or the menu for selecting the operating system
appears.
► If the menu for selecting the operating system appears, press F8 .
► Select Safe Mode or Safe Mode with Network.
► Set the correct values for the attached monitor as described in the operating manual of the
monitor by selecting Start - Settings - Control Panel - Display and then the Appearance, Themes,
Settings tabs.
Wrong setting for the monitor under Windows Vista
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu or the menu for selecting the operating system
appears.
► If the menu for selecting the operating system appears, press F8 .
► Select Safe Mode or Safe Mode with Network.
► Set the correct values for the connected monitor, as described in the operating manual of the
monitor, by selecting Start (Settings) - Control Panel - Display – Settings
Wrong monitor has been set under Window 7
► Restart the device.
► Press F8 while the system is booting.
Either the Windows Advanced Start Options menu or the menu for selecting the operating system
appears.
► If the menu for selecting the operating system appears, press F8 .
► Select Safe Mode or Safe Mode with Network.
► Select Start – Control Panel – Appearance and Themes – Display to set the correct values for the
connected monitor, as explained in the monitor instructions.
The wrong RAM modules have been inserted
See the manual for the mainboard for information on which memory modules can be used.
34 Fujitsu Technology Solutions