Huffy Pro Image Rim Owner's Manual page 6

1.
Install two carriage bolts (2) through rim (1), washers (3), and lock washers (9) as shown.
Tighten nuts (4) completely.
Perform this step twice
as it is applied to both
holes of rim bracket
2
3
9
4
2.
Place a special locking nut (20) approximately half-way up on each carriage bolt (2) as
shown. Keep the two special locking nuts (20) at the same level.
2
20
P/N 211644 11/03
NOTE:
shown
1
NOTE: COMPLETED ASSEMBLY:
NOTE: COMPLETED ASSEMBLY:
6