Ap Mode Setting - Air Live WL-5460AP v2 User Manual

AP Mode setting

Alias Name
Disable Wireless
LAN Inter face
Ba nd
SSID
You can s et the alias name for this device. limited not exceed 32
characters
Check the box to disable the Wireless LAN Interface, by so doing, you
won't be able to make wireless connection with this Access Point
network you are located. In other words, this device will not be visible by
any wireless station.
You can choose one mode of the following you need.
2.4GHz (B): 802.11b supported rate only.
2.4GHz (G): 802.1
2.4GHz (B+G): 802.11b supported rate and 802.11g supported rate.
The default is 2.4GHz (B+G) mode.
The SSID differentiates one WLAN from anoth
points and all devices attempting to connect to a specific WLAN must use
the same SSID. It is case-sensitive and must not exceed 32 characters. A
device will not be permitted to join the BSS unless it can provide the
unique SSID. An SSID is also referred to as a network name because
essentially it is a name that identifies a wireless network.
1g supported rate only.
19
er; therefore, all access
WL5460AP v2 User's Manual
in the