Advertisement
Secure tank struts (16) to pole as shown.
3.
Nut should be tightened until flush (even) with lock nuts outer edge. Place cap (17) over
exposed end of bolt as shown.
13
16
Rotate non-secured ends of tank struts (16) outward to mounting holes in tank as
4.
shown.Secure ends of tank struts (16) to tank as shown. Repeat for opposite side.
16
10
10
17
14
13
WARNING!
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT
IN SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
IMPORTANT!
9
16
10
10
11
04/06
ID#
M6011141
Advertisement
