www.mgeups.com
Input # 1 and Input # 2 show the position of the two contacts acquired by the sensor.
The position is displayed with the parameters entered in the
The last status change of each contact is time-stamped.
The Internet browser updates this page regularly according to the Environment refresh rate parameter on the
System settings
page.
3.6.3 Environment Settings
The environment sensor measures temperature, humidity and the status of the 2 contacts (used for door,
alarms or generator unit).
The temperature and humidity thresholds can be adjusted and can trigger notification and correct shutdown of
the protected system.
The Sensor name is the function name given to the sensor, usually it enables location of the sensor.
T H E
U N I N T E R R U P T I B L E
Network Management Card
P O W E R
– User Manual
34003676EN/BB
Network
Management Cards
User Manual
Environment Settings
page.
P R O V I D E R
Page
47/76