MGE UPS Systems Minislot 66244 User Manual page 16

www.mgeups.com
"Communication": indicates the status of the communication between the card and the UPS
"Power source": indicates whether the power comes from the utility or from the UPS battery
"Batteries": indicates whether the battery is being charged or discharged
"Output load level": indicates the power percentage used at UPS output
"Master output": indicates if the UPS output is protected
"Controlled outlets": indicates if the controlled outlets (if available) are powered.
3.2.1.3 "Battery status" zone:
"Bargraph": Graph showing the remaining battery charge (in percent).
"Battery charge level": Remaining battery charge (in percent).
"Remaining backup time": Estimation of the maximum backup time remaining before UPS shutdown.
This time can be modified by the adjustments on the "Shutdown parameters" page
"Last periodical test": Result of the last automatic battery test carried out by the UPS
Possible values are:
- OK: the test was completed correctly
– NOK: the battery needs to be checked
– Deactivated: the automatic battery test is not validated on the UPS
T H E U N I N T E R R U P T I B L E
Network Management Card
P O W E R
– User Manual 34003676EN/BB
Network
Management Cards
User Manual
P R O V I D E R
Page
16/76