Table of Contents
Advertisement
www.mgeups.com
3.2.4 UPS weekly schedule programming
Click on the "Weekly schedule" section of the menu.
If the UPS is not compatible with this function, a warning message is sent to the user.
UPS configuration may also prevent the commands from being properly run. Read the UPS manual for more
information.
The weekly schedule enables the administrator to optimise power consumption or program a reboot of the
protected equipment at a set time.
In a shutdown sequence, the Network Shutdown Modules connected to the card are informed and ensure
that each machine is shut down correctly before the UPS output is switched off.
Up to 7 UPS shutdown sequences can be programmed in one week, with a minimum shutdown delay of 30
minutes.
Security: the administrator clicks on "Save" and enters his/her login / password to save any edits. The login
and password by default are: MGEUPS.
T H E
U N I N T E R R U P T I B L E
Network Management Card
P O W E R
– User Manual
34003676EN/BB
Network
Management Cards
User Manual
P R O V I D E R
Page
21/76
Advertisement
Table of Contents
