Using 3-Way Calling - Nortel 1140E User Manual

While on an active call
To make a call on hold the active call
Switch

Using 3-way calling

When you have more than one call and you want to join the incoming
calls into one call, you can use either 3-way calling or create a conference
call.
Note: Your system administrator or service provider must enable 3-
way calling and conference calls for your IP Phone 1140E. Please
contact your service provider or system administrator to determine if
this feature is available.
The 3-way Call feature joins two calls on your phone into one 3-way call.
You and the other two callers can speak together. When you join more
than two calls into one call you must use the conference call feature. Your
IP Phone 1140E manages the 3-way call and the server manages a
conference call. (See "Setting up a conference call" on page 147)
To activate the 3-way Call feature, press the
key, with either call and select
on page 145.) The phone joins the two calls and creates a new call that
appears on the LCD screen as [3-way Call]. (See Figure 23 on page 147.)
146
1. Press the Up/Down
highlight a call on hold.
2. Press the Switch
key to make the highlighted call on hold
the active call. This removes the call
from on hold and automatically places
the previous call on hold.
Join
3-way Call from the menu. (See Figure 22
navigation key to
Context-sensitive soft
Context-sensitive soft