Connecting Devices To The Server - Fujitsu PRIMERGY TX150 S7 Operating Manual

Hardware installation
4.4

Connecting devices to the server

The connectors for external devices are on the front and rear of the server. The
additional connectors available on your server depend on the expansion cards
installed. For further information refer to the "Options Guide".
The standard connectors are indicated by symbols and color coding:
Figure 9: Connector panel on the rear side
1 Service LAN connector (LAN 1)
2 Shared LAN connector (LAN 2)
3 USB connectors (black)
4 Video connector (blue)
5 Serial connector COM1 (turquoise)
I
Some of the devices that can be connected may require special drivers
(see the documentation for the connected device).
Ê Connect the data cables to the server and peripherals.
Three additional USB connectors are located on the front of the server (see
figure 14 on page
TX150 S7
62).
Operating Manual
Connecting devices to the server
55