Fujitsu PRIMERGY TX150 S7 Operating Manual page 112

Non-hot-plug components
Ê Press the side cover against the housing and at the same time push the
locking lever shut (2).
Closing the locking lever pushes the side cover forwards and the hooks on
the upper edge of the side cover engage.
Ê In the case of rack models, you still have to slide the server back into the
rack (see section
Ê Connect all power plugs to the power outlets.
Ê Press the On/Off button to start up the server.
112
"Installing/removing the rack model" on page
Operating Manual
CSS components
45).
TX150 S7