Fujitsu PRIMERGY TX150 S7 Operating Manual page 69

Starting up and operation
LAN indicators
Figure 17: Indicators on the connector panel: LAN indicators
1 LAN
link/transfer
(service LAN)
2 LAN speed
(service LAN)
3 LAN
link/transfer
(system LAN)
4 LAN speed
(system LAN)
I
Depending on the settings in the BIOS, the system LAN connector may
also be used as a service LAN connector. You will find further information
in the "D2759 BIOS Setup Utility for PRIMERGY TX150 S7" manual.
TX150 S7
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Flashes green when LAN transfer takes place.
Steady green signal in the event of a LAN transfer rate
of 100 Mbit/s.
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Flashes green when LAN transfer takes place.
Steady yellow signal in the event of a LAN transfer rate
of 1 Gbit/s
Steady green signal in the event of a LAN transfer rate
of 100 Mbit/s.
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
Operating Manual
Control elements and indicators
69