Bypass Operation; Loading Lid Operation - Lopi Leyden Owner's Manual

Bypass Operation

The bypass controls the flow of smoke inside the heater. When pulled out, smoke goes directly up the
flue, creating more draft. When pushed in, the smoke goes around the baffle, utilizing the secondary
combustion and making the heater more efficient.

When starting or re-loading, pull the bypass out.

During normal operation, push the bypass in.
To open the bypass, push on the
lever and rotate the handle up.

Loading Lid Operation

Open the bypass first (this
b
helps prevent smoke from
entering the room).
Do not wear loose clothing while re-loading the stove. Any item dangling above the opening may ignite.
Carefully close the loading lid after use. Allowing it to "slam" shut may damage the stove.
© Travis Industries
Operating Your Appliance
To close the bypass, simply rotate the
handle down.
Open the lid 1" for a few
c
seconds to allow air to
enter the firebox.
WARNING: This part
becomes hot - use gloves.
Open the air control and allow air to flow
a
into the firebox for 30 seconds.
100-01177
Bypass OPEN
Used for starting
and re-loading
Bypass CLOSED
Used for normal
operation
Lift the lid upward.
d
21
A log poker is
provided with this
stove. It attaches
with a clip to to the
back of the stove.
4110913