Call Park - Panasonic KX-TAW848 User Manual

• The CO or INTERCOM button light shows the current status as follows:
— Regular Hold mode
Flashing green slowly : Your held call
Flashing red : Another extension's held call
— Exclusive Call Hold mode
Flashing green rapidly : Your held call
Red on : Another extension's held call
• Hold Mode Change (PT only)
After pressing the HOLD button, if you press the HOLD button again, the status
switches from the Regular Hold mode to the Exclusive Call Hold mode or from
the Exclusive Call Hold mode to the Regular Hold mode.
• For simple operation, you can automatically hold a call by pressing another
CO, G-DN or INTERCOM button, only if preprogrammed. (Automatic Call
Hold) Consult your dealer.

Call Park

You can put a call on hold in a common parking zone of the PBX so that any extension
can retrieve the parked call. You can use this feature as a transferring feature.
A call can be put into either a specified parking zone (Specified) or any idle parking zone
(Auto). If a Call Park button and Call Park (Automatic Park Zone) button have been
established, you can select either way to park by simply pressing the corresponding
button.
When a call is parked automatically, or more than one call has been parked at the same
time, you need to specify the parking zone number to retrieve the required call.
To set
PT/PS
During a conversation
(Call Park)
Press Call Park .
1.4 During a Conversation
User Manual 49