Panasonic KX-TAW848 User Manual page 16

1.1 Before Operating the Telephones
FLASH/RECALL :
FLASH/RECALL
Used to disconnect the current
call and make another call without
hanging up.
VOICE CALL :
VOICE CALL
Used to monitor an intercom call
automatically, but it cannot be
used for hands-free
conversations.
PROGRAM :
Used to enter and exit the
Programming mode.
Customized Buttons
If the term is in parentheses like (Account) in this section, it means a flexible button has
been made into an "Account" button. To customize, refer to " 3.1.3 Customizing the
Buttons ".
Buttons
Loop-CO (L-CO)
Group-CO (G-CO)
Single-CO (S-CO)
Direct Station Selection
(DSS)
One-touch Dialing
Group Directory Number
(G-DN)
16 User Manual
Used to access an idle CO line for making outside calls.
Incoming outside calls from any CO line arrive at this button.
Used to access an idle CO line in a specified CO line group for
making outside calls.
Incoming calls from CO lines in the assigned CO line group
arrive at this button.
Used to access a specified CO line for making or receiving
outside calls.
Used to access an extension with one-touch.
It is also possible to be changed to the other feature button.
Used to access a desired party or system feature with one-
touch.
Used to access a specified incoming call distribution group for
making or receiving calls.
Call Forwarding (FWD)/Do Not
Disturb (DND) :
Used to perform Call Forwarding
(FWD) or Do Not Disturb (DND).
Navigator Key/Volume Key :
Used to adjust the volume and the
display contrast or select desired
items.
Programmable Feature (PF) :
Located on the right part of the
(PF)
CO button array or on the DSS
Console. Assigns the desired
button and used to access the
stored feature. Mostly used as a
One-touch Dialing button. (Only
the "F and number" may be shown
on some telephones.)
Feature