Table of Contents
Advertisement
Chapter 2 Specifications
The TI6VG4 is a high-performance ATX Apollo Pro 133(A)
motherboard with a Slot 1 connector for Pentium
offers flexibility in terms of CPU frequency and main memory type and
size. The main features of the motherboard consist of the following:
CPU Socket
Slot 1
Processor
Intel Pentium II 233/266/300MHz (66MHz / Klamath)
Intel Celeron 266/300/300A/333 (66MHz)
Intel Pentium II 333MHz (66MHz / Deschutes)
Intel Pentium II 300/350/400/450MHz (100MHz / Deschutes)
Intel Pentium III 450/500/550MHz (100MHz / Katmai)
Intel Pentium III 533/600/667MHz (133MHz / Katmai/Coppermine)
L2 Cache
CPU integrated L2 cache
Main Memory
Three 168-pin DIMM sockets with PC133 support
Memory types: Extended Data Output (EDO) DRAM, SDRAM
(Synchronous DRAM)
Memory size: 16MB, 32MB, 64MB, 128MB, 256MB, 512MB
Chipset
VIA Apollo Pro 133(A) (VT82C693AA/X and VT82C686A)
Super I/O
The super I/O is a built in the VT82C686A chip and supports:
Two 16550 UART compatible serial ports
One parallel port (ECP/EPP compatible)
One floppy controller (2.88MB compatible)
One IrDA port
PCI Bus Master IDE Controller (UDMA33/66)
Onboard PCI Bus Master IDE (UDMA33/66) controller with two
connectors for up to four IDE devices in two channels, supporting
faster data transfer rates, enhanced IDE devices, PIO Mode 3/4 and
Bus Mastering Ultra DMA33/66 (You have to install the Bus Master
IDE driver to enable this feature.)
TI6VG4 User's Manual
Chapter 2 Specifications
II/III processors. It
3
Advertisement
Table of Contents
