TMC TI6VG4 User Manual page 41

CPU L2 Cache ECC Checking
When enabled, this allows ECC checking of the CPU's L2 cache. By
default, this field is Enabled.
Processor Number Feature
Enabling this feature allows the identification of the processor number by
the use of certain programs.
Quick Power On Self Test
When enabled, this field speeds up the Power On Self Test (POST) after
the system is turned on. If it is set to Enabled, BIOS will skip some items.
Boot Sequence
This field determines the drive that the system searches first for an
operating system. The default value is A, C, SCSI. The options are :
A, C, SCSI
C, A, SCSI
C, CDROM, A
CDROM, C, A
Swap Floppy Drive
This item allows you to determine whether or not to enable Swap Floppy
Drive. When enabled, the BIOS swaps floppy drive assignments so that
Drive A becomes Drive B, and Drive B becomes Drive A. By default,
this field is set to Disabled.
Boot Up Floppy Seek
When enabled, the BIOS will seek whether or not the floppy drive
installed has 40 or 80 tracks. 360K type has 40 tracks while 760K, 1.2M
and 1.44M all have 80 tracks. By default, this field is set to Enabled.
Boot Up NumLock Status
This allows you to activate the NumLock function after you power up the
system. By default, the system boots up with NumLock On.
IDE HDD Block Mode
This allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive (HDD). By default, this
field is set to Enabled.
TI6VG4 User's Manual
Chapter 6 BIOS Configuration
D, A, SCSI SCSI, C, A
E, A, SCSI C only
F, A, SCSI LS/ZIP, C
SCSI, A, C
37