Table of Contents
Advertisement
3. Getting Ready
Install and charge the battery
New batteries are shipped partially charged. Before you start using your device, it is
recommended that you install and charge the battery.
To install the battery
1.
Make sure your device is
turned off.
2.
Slide the back cover upward
to remove it as shown in the
following illustration.
3.
Install the battery by inserting
it with its exposed copper part
aligned with the protruding
copper conductor on the
lower-left side of the battery
compartment.
Insert the bottom side of the
battery first, then gently push
the battery into place.
4.
Replace the back cover.
11
Advertisement
Table of Contents
