Download Print this page

HTC Touch Diamond 080716 Quick Start Manual

Htc cell phone user manual

Advertisement

Quick Links

Barcode
P/N
2
Your HTC Touch Dual™
Left, Front, and Bottom View
VOLUME UP
VOLUME DOWN
3

Battery and Power

Installing the Battery

1.
Make sure your device is turned off.
2.
Hold the device with both hands and
the front panel facing down. Push the
back cover up with your thumb until it
disengages from the device and then slide
it up to remove.
3.
Align the battery's exposed copper
contacts with the battery connectors
inside the battery compartment. Insert
the contact's side of the battery first and
then gently push the battery into place.
4.
Replace the back cover.

Charging the Battery

1.
Connect the USB connector of the AC adapter to the sync connector on your
device.
2.
Plug in the AC adapter to an electrical outlet to start charging the battery.
The battery is fully charged after about 3 hours of charging.
4

The Home Screen

TouchFLO™ 3D
The Home screen of the device is the TouchFLO™ 3D Home screen, which allows
finger-touch access to the most important functions such as contacts, text
messages, e-mail, Internet, and more.
Home
People
Music
Internet
Read First Poster
Earpiece
Touch Screen
HOME
Navigation Control
BACK
END
TALK/SEND
Microphone
Sync Connector/
Earphone Jack
Strap Holder
Photos and
Messages
Mail
Videos
Weather
Settings
Programs
1
What's in the Box
The Touch Diamond Phone
Battery
Extra Stylus
AC Adapter
Wired Stereo Headset
USB Sync Cable
Multifunction Audio Cable
Pouch
Screen Protector
Read First Poster and Quick Start Guide
Getting Started Disc
Top, Back, and Right View
POWER
3.2 Megapixel
Camera
Back Cover
Starting Up
After installing the battery and charging the battery, you can now power on and
start using your device.
1.
Press and hold the POWER button for a few seconds.
2.
A Quick Start Wizard guides you through the calibration of the screen and the
setup of regional settings, date and time, and password. Follow the onscreen
instructions to finish the Quick Start Wizard. After the Quick Start Wizard
finishes, the device installs customization settings, then restarts.

Sleep Mode

When the device is turned on, press and immediately release the POWER button to
turn off the display temporarily and switch your device to Sleep mode. Sleep mode
suspends your device to a low power state while the display is off in order to save
battery power.
Your device automatically goes into Sleep mode when you leave the device idle
after a certain period of time.
You will still be able to receive messages and calls while your device is in Sleep
mode. Pressing the POWER button again or incoming calls/messages will wake up
your device.
Switching between the Tabs
Press and hold your finger on the active tab, then slide your
finger right or left over the tabs. Release when you have
selected the desired tab.
You can also swipe left or right across the screen to go to the
next or previous tab.

Finger Gestures

You can use finger gestures to scroll, pan, and zoom on the touch screen of your
device.
Finger scrolling
Finger panning
You can easily scroll the
On the touch screen, drag
screen by simply sliding
your finger in any direction
your finger on the touch
to move to other parts of a
screen.
zoomed photo, Web page,
document, or an e-mail.
Speaker
Stylus
Finger zooming
The type of finger gesture
to use when zooming
varies in different
programs:
To zoom in on a Web
page, tap your finger
twice on the screen.
To zoom in on a photo
in Album, make a full-
circle swipe on the
touch screen.

Advertisement

loading

Summary of Contents for HTC Touch Diamond 080716

  • Page 1: Battery And Power

    Read First Poster Barcode Your HTC Touch Dual™ Left, Front, and Bottom View VOLUME UP Touch Screen VOLUME DOWN Strap Holder Battery and Power Installing the Battery Make sure your device is turned off. Hold the device with both hands and the front panel facing down.
  • Page 2: Using The Phone

    Using the Phone Making your first call On the Home screen, tap Phone to open the Phone screen. Tap the keys on the keypad to enter the phone number. Press the TALK/SEND button to place the call. Tap Phone Dial the phone number Synchronizing Information Set up ActiveSync®...

This manual is also suitable for:

Touch diamondTouch dual