Important: Read All Warnings Before You Begin.; Cautions; Warnings; Preparing The Light Kit - Hunter Floating Glass Light Kit Installation Instructions Manual

CAUTIONS

• Read entire installation instructions carefully before beginning installation and save these
instructions.
• To avoid possible risk of electrical shock and fire, install this light fixture only on Hunter ceiling fan
Type A-Z. Find the fan model number on the fan package or on the nameplate on top of the motor
housing.

WARNINGS

• To avoid possible electrical shock, before installing light fixture disconnect power
by turning off the circuit breakers both to the outlet box and to its associated wall
switch location. If you cannot lock the circuit breakers in the off position, securely
fasten a prominent warning device, such as a tag, to the service panel.
• Connect house wiring to the fan before attaching the light fixture to the fan.
• All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with
wiring, you should use a qualified electrician. Professional installation is recommended.
• To reduce the risk of fire or personal injury, allow bulbs and surrounding surfaces to cool to room
temperature before touching or removing them.
This light fixture weighs 2.12 pounds.
This manual contains installation instructions for the following mounting methods:
• Fans With Removable Switch Housing
• Fans With Non-Removable Switch Housing
• Fans With Non-Removable Switch Housing and No Center Hole
Preparing the Light Kit
1. Disconnect power by turning off the circuit breakers both to the outlet box and to its
associated wall switch location.
2. The shade cover plate comes in a choice of decorative finishes. In addition, the cover plate
for the ceiling-mounted light has no hole in the side; the cover plate for the fan-mounted
light has a hole in the side. Choose the cover plate that applies to your decorating
preference and your mounting preference.
2

IMPORTANT: Read all warnings before you begin.

This light fixture is for use only on Hunter Ceiling Fans Type A-Z.
I O
43525-01 r091107