Related Manuals for Hunter Bullet Spotlight Kit
Summary of Contents for Hunter Bullet Spotlight Kit
- Page 1 Bullet Spotlight Kit Bullet Spotlight Kit Bullet Spotlight Kit Owner’s Guide and Installation Manual Manual De Propietario Form# 43551-01 20090420 ©2009 Hunter Fan Co.
- Page 2 • To reduce the risk of personal injury, install this light fixture only on Hunter® fan types A through Z. Note: The fan type can be found on the ceiling fan package or on the nameplate label located on top of the motor housing of the ceiling fan.
- Page 3 Installation Methods of Hunter® Ceiling Fans Type A-Z Your ® light kit can be installed in one of three ways, depending on the type of switch housing. The steps in this manual include instructions for all three installation methods: Fans with removeable switch housings, fans with non-removeable switch housings, and Hunter Originals.
- Page 4 Screw WARNING: Improper installation could cause the light fixture to fall. Lower Switch Housing Steps 1-2 Plug Button Switch Housing Washer Light Kit Threaded Fitter #6-32 Step 7 Steps 3-5 Screw 43551-01 • 04/20/09 • Hunter Fan Company...
- Page 5 13. The installation is complete and you can restore power to the ceiling fan Light Kit Light Kit Fitter Plug Connector (included) Steps 10-11 Lower Switch Housing Plug Housing Connector Assembly Screw Detail Step 9 43551-01 • 04/20/09 • Hunter Fan Company...
- Page 6 Housing Cover fall, or result in electrical shock or personal injury. Attachment Screw Steps 1-2 Plug Switch Housing Washer Cover Screw Hole Attachment Screw Light Kit Fitter Wire Steps 3-7 Connectors Step 5 43551-01 • 04/20/09 • Hunter Fan Company...
- Page 7 Tighten the screws securely. 10. Install the included CFL bulbs. 11. The installation is complete and you can restore power to the ceiling fan. Step 8 Light Kit Light Kit Fitter (included) Step 9 43551-01 • 04/20/09 • Hunter Fan Company...
- Page 8 Installing the Light Kit on the Hunter Original 1. Uninstall the two attachment screws from the switch housing cover. NOTE: Save the switch housing cover should you choose to remove the light fixture in the future. 2. Remove the wire connectors from the two wires in the switch housing labeled “Connect Light Here”...
-
Page 9: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. # 400 Memphis, Tennessee 38016 This Light Fixture Weighs 4 lbs. Printed in China 43551-01 • 04/20/09 • Hunter Fan Company...