Related Manuals for Hunter Marine II
Summary of Contents for Hunter Marine II
- Page 1 Marine II Outdoor Marine II Outdoor Marine II Outdoor Light Kit Light Kit Light Kit Owner’s Guide and Installation Manual Manual De Propietario Form# 43552-01 20140415 ©2014 Hunter Fan Co.
-
Page 2: Table Of Contents
• To reduce the risk of personal injury, install this light fixture only on Hunter® fan types A through Z. Note: The fan type can be found on the ceiling fan package or on the nameplate label located on top of the motor housing of the ceiling fan. -
Page 3: Removable Switch Housing
Installation Methods of Hunter® Ceiling Fans Type A-Z Your ® light kit can be installed in one of three ways. The steps in this manual include instructions for all three installation methods: Installation on fans with removeable switch housings, fans with non-removeable switch housings, and The Hunter Original. -
Page 4: Removable Switch Housing
Go to the instructions for installing the bulbs and globe. Steps 6-7 Steps 3-5 Switch Housing Wires WARNING: Improper Threaded installation could Washer cause the light fixture to fall. Light Kit Fitter #6-32 Screw 43552-01 • 04/15/14 • Hunter Fan Company... - Page 5 Screw Washer after making the connections. Hole WARNING: Improper installation Wires could cause the light fixture to fall. and Wire connectors Threaded Switch Housing Step 3 Steps 3-5 Step 6 Cover 43552-01 • 04/15/14 • Hunter Fan Company...
- Page 6 9. Securely tighten the two screws. 10. Go to the instructions for Installing the Bulbs, Chains, and Globe. Attachment Screw Step 8 43552-01 • 04/15/14 • Hunter Fan Company...
-
Page 7: Original
3 • Installing the Light Kit on the Hunter Original 1. Uninstall the two screws from the switch housing plate. NOTE: Save the switch housing cap should you choose to remove the light fixture in the future. 2. Remove the wire connectors from the two wires in the switch housing labeled “Connect Light Here”... -
Page 8: Installing The Light Kit On A Fan With A Removable Switch Housing Cap
Gasket CAUTION: Be sure no bare metal wires or wire strands are visible after making the connections. WARNING: Improper installation could cause the light fixture to fall. Attachment Screws Step 2 Step 5 43552-01 • 04/15/14 • Hunter Fan Company... -
Page 9: Installing The Bulbs, Chain, And Globe
3. Attach the globe assembly to the light kit mounting plate using the pre- Plate installed screws. Tighten the screws securely to the light kit mounting plate. 4. The installation is complete and you can restore power to the ceiling fan. Globe Assembly CFL Bulb (included) 43552-01 • 04/15/14 • Hunter Fan Company... -
Page 10: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.HunterFan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy, Suite 400 Memphis, Tennessee 38016 This Light Fixture Weighs 6 lbs. Printed in China 43552-01 • 04/15/14 • Hunter Fan Company...