• To reduce the risk of personal injury, install this light fixture only on Hunter® fan types A through Z . Note: The fan type can be found on the ceiling fan package or on the nameplate label located on top of Table Of Contents the motor housing of the ceiling fan .
Page 3
Installation Methods of Hunter® Ceiling Fans Type A-Z Your ® light kit can be installed in one of four ways . The steps in this manual include instructions for all four installation methods: Installation directly on the ceiling, installation on fans with a removeable switch housing, fans with a non-removeable switch housing, and The Hunter Original .
8 . Install the decorative nuts on the end of each of the #8-32 screws . Tighten Decorative securely . WARNING: Improper installation could cause the light fixture to fall, or result in electrical shock or personal injury . Steps 5-8 43550-01 • 06/10/10 • Hunter Fan Company...
Page 5
13 . Thread the light pull chain through the finial and screw the finial onto the threaded rod until tight . 14 . The installation is complete and you can restore power to the light fixture . Steps 11-14 Cover Plate Finial Light Pull Chain 43550-01 • 06/10/10 • Hunter Fan Company...
Steps 1-2 Plug Button Washer Threaded WARNING: Improper installation could cause the light fixture to fall . Lower Switch Switch Housing Housing Cover (included Attachment with the Screws light fixture) Light Fixture Steps 3-6 43550-01 • 06/10/10 • Hunter Fan Company...
Page 7
9 . Reinstall screws to reattach the lower switch housing to the upper switch housing . 10 . Go to the instructions for Installing the Bulbs, Chains, and Globe . Step 7 Plug Connector Step 8 Housing Assembly Screw Lower Switch Housing Plug Connector Detail 43550-01 • 06/10/10 • Hunter Fan Company...
. WARNING: Improper installation Attachment Screw could cause the light fixture to fall . Light Fixture Wires and Wire connectors Step 7 Steps 3-6 43550-01 • 06/10/10 • Hunter Fan Company...
Page 9
. 9 . Securely tighten the two screws . 10 . Go to the instructions for Installing the Bulbs, Chains, and Globe . Wires and Wire connectors Step 8 43550-01 • 06/10/10 • Hunter Fan Company...
4 • Installing the Light Kit on the Hunter Original 1 . Uninstall the two screws from the switch housing plate . NOTE: Save the switch housing cap should you choose to remove the light fixture in the future .
Thread the light pull chain through the finial and screw the finial onto the threaded rod end until tight . For Light Bulbs Metal Rod Metal Disc Pull Chain Glass Bowl Breakaway Connector Cover Plate Finial 43550-01 • 06/10/10 • Hunter Fan Company...
888-830-1326 or visit us at our Web site at http://www . h unterfan . c om . Hunter Fan Company 7130 Goodlett Farms Pkwy . # 400 Memphis, Tennessee 38016 This Light Fixture Weighs 6 lbs . Printed in China 43550-01 • 06/10/10 • Hunter Fan Company...
Need help?
Do you have a question about the Dual Function Bowl Light Kit and is the answer not in the manual?
Questions and answers