Page 2
• To avoid possible risk of electrical shock and fi re, install this light fi xture only on Hunter fans, models 23720, 23721, and Hunter type A-Z. Note: To fi nd the fan model number, check the ceiling fan package or on the nameplate label located on top of the motor housing of the ceiling fan.
Page 3
Installing the Casbah Light Kit on the Casbah Fan � � Uninstall the two screws from the lower switch housing. Remove the screw from the center hole of the lower switch housing. read the lower switch housing onto the wires from the light kit and screw the lower switch housing onto the top of the light kit.
Page 4
Installing the Casbah Light Kit on Other Hunter Fans � � Unscrew the three screws from the upper switch housing. Disconnect the 9-pin plug connectors. Remove the lower switch housing. Push the plug button from inside the lower switch housing to remove the plug button and switch housing cap.
Page 5
Installing the Casbah Light Kit on an Original Hunter Fan � � Uninstall the switch housing cover by removing the two screws. Do not discard the switch housing cover or screws, as you may wish to remove the light kit later.